Transparent Pricing · No Hidden Fees · Free Estimates
NYC Landscaping Prices & Cost Guide 2026
What does landscaping actually cost in New York City? This is the most comprehensive pricing guide for NYC landscaping services you will find anywhere. Real numbers, borough-by-borough breakdowns, seasonal pricing trends, and everything you need to budget your next outdoor project. Every project we take on starts with a free, detailed written estimate — no surprises, no hidden line items.
Serving Manhattan, Brooklyn, Queens, Bronx, Staten Island, Long Island & Westchester
Three Ways to Work With Us
Whether you need weekly maintenance, a full design-build project, or commercial property management — we have a plan that fits your property and budget.
Maintenance
Ongoing lawn, garden, and property care for homes, brownstones, and small commercial lots. Our maintenance plans keep your landscape looking sharp week after week with consistent, professional attention. Choose weekly or biweekly visits based on your property size and needs. Every maintenance client gets a dedicated crew that learns your property inside and out.
- ✓Weekly or bi-weekly visits
- ✓Mowing, edging & blowing
- ✓Weeding & bed maintenance
- ✓Seasonal flower rotations
- ✓Shrub & hedge trimming
- ✓Debris removal & cleanup
- ✓Monthly property reports
- ✓Priority scheduling
- ✓Spring & fall cleanup included in annual plans
- ✓Fertilization & weed control programs
Design & Build
Full-service landscape design and installation — from initial consultation through final walkthrough. Our design-build process starts with a thorough site analysis, moves through custom 3D renderings, and finishes with expert installation by our own crews. We handle every detail: plant selection for NYC's Zone 7a/7b climate, hardscape engineering, irrigation, lighting, permits, and project management.
- ✓On-site consultation & survey
- ✓Custom 3D landscape design
- ✓Plant selection for Zone 7a/7b
- ✓Hardscaping & patios
- ✓Irrigation system installation
- ✓Landscape lighting design
- ✓Sod & turf installation
- ✓Retaining walls & drainage
- ✓NYC DOB permit handling
- ✓Project management start to finish
Commercial
Comprehensive grounds management for property managers, HOAs, retail centers, office buildings, restaurants, and hotels. We build custom service plans around your property portfolio — whether that is a single building or twenty sites across the metro area. Dedicated account managers, 24/7 emergency response, and the consistency your tenants and visitors expect.
- ✓Dedicated account manager
- ✓Custom maintenance schedules
- ✓Snow & ice management
- ✓Seasonal color programs
- ✓Irrigation monitoring & repair
- ✓Tree & shrub healthcare
- ✓24/7 emergency response
- ✓Multi-property discounts
- ✓Monthly performance reports
- ✓Budget forecasting & planning
All prices are estimates. Final pricing based on property size, scope, materials, and borough. Free on-site estimates for all projects. Read our FAQ for more details on how we price projects.
Service-by-Service Pricing Guide
Real NYC landscaping costs, updated for 2026. These ranges reflect typical residential projects in the NYC metro area. Commercial pricing varies by scope and is quoted per property. Click any service to learn more about what is included.
| Service | Price Range |
|---|---|
| Lawn Maintenance (per visit) | $150 – $500 |
| Landscape Design (residential) | $2,500 – $15,000 |
| Landscape Design (commercial) | $5,000 – $50,000+ |
| Rooftop Garden Design & Build | $15,000 – $100,000+ |
| Patio & Hardscape Installation | $5,000 – $40,000 |
| Irrigation System Installation | $2,500 – $12,000 |
| Landscape Lighting | $2,000 – $15,000 |
| Tree & Shrub Planting | $200 – $2,500/tree |
| Sod & Turf Installation | $3 – $8/sq ft |
| Retaining Walls | $50 – $150/sq ft |
| Drainage Solutions | $1,500 – $10,000 |
| Seasonal Flower Rotations | $300 – $2,000/rotation |
| Snow Removal (per visit) | $200 – $1,500 |
| Snow Removal (seasonal contract) | $2,000 – $15,000 |
| Fence & Gate Installation | $3,000 – $20,000 |
| Outdoor Kitchen / Fire Pit | $8,000 – $50,000+ |
| Power Washing | $300 – $1,500 |
| Full Property Cleanup | $500 – $3,000 |
Prices reflect NYC metro area averages for 2026. Actual costs vary by property size, access, materials, borough, and season. Request a free estimate for exact pricing on your project.
Borough-by-Borough Cost Multipliers
Where you live in the NYC metro area has a direct impact on what you pay for landscaping. A rooftop garden in Manhattan involves fundamentally different logistics than a backyard project in Staten Island. Here is how location affects your estimate.
| Borough / Region | Cost Multiplier |
|---|---|
| Manhattan | 1.3x – 1.5x |
| Brooklyn | 1.1x – 1.3x |
| Queens | 1.0x (base) |
| Bronx | 1.0x – 1.1x |
| Staten Island | 0.9x – 1.0x |
| Long Island | 1.0x – 1.2x |
| Westchester | 1.1x – 1.3x |
How to Read These Multipliers
If a service costs $10,000 at our base rate (Queens pricing), the same project in Manhattan would run $13,000 to $15,000 — a 1.3x to 1.5x multiplier. This is not a markup on profit. It reflects real, additional costs: crane rentals can run $2,000 to $5,000 per day, freight elevator reservations must be scheduled and paid for, DOB permits for rooftop work cost $1,000+, and street closure permits (when needed for material delivery) add another $500 to $2,000. In Brooklyn, brownstone access often means hand-carrying hundreds of pounds of soil, stone, and plants through narrow hallways or side gates — that takes more labor hours, which means higher cost. In Staten Island or suburban Long Island, we can back a truck right up to the work area and unload with a skid steer — that efficiency saves you money.
What Affects Landscaping Cost in NYC
Landscaping in New York City is not like landscaping anywhere else. Here are the factors that determine what your project will cost — and why NYC prices are different from national averages.
Property Size and Access
The single biggest factor in any landscaping estimate is the size of the area being worked on — but in NYC, access is equally important. A 2,000 square foot backyard in Forest Hills, Queens with a driveway and wide side gate is a completely different job than a 2,000 square foot rooftop terrace on the Upper East Side that requires a freight elevator and DOB permits.
For ground-level properties, we measure the actual landscapable area — not the total lot size. A 4,000 square foot lot with a 2,000 square foot house has roughly 2,000 square feet of landscape area, and that is what we price. We also assess equipment access: can we get a mini excavator through your gate? Will we need to hand-dig? Can a dump truck park within 50 feet of the work area, or will we be wheelbarrowing materials 200 feet through a narrow side yard? Every one of these factors affects labor hours and therefore cost.
For rooftop and terrace projects, the square footage of the space is just the starting point. We need to know the building’s freight elevator capacity (if it has one), the floor the terrace is on, whether crane access is available, and what the structural load capacity is. A 500 square foot rooftop garden that requires crane delivery of materials can easily cost more than a 2,000 square foot ground-level project with good truck access.
Borough and Neighborhood
As shown in our borough multiplier table above, location matters. But it is not just about boroughs — specific neighborhoods within each borough have their own cost dynamics. In Brooklyn, a patio installation in a Park Slope brownstone with a narrow side gate costs more than the same patio in a Bay Ridge house with a driveway, even though both are in Brooklyn.
Neighborhood also affects parking availability for our crews and trucks. In dense areas like Midtown Manhattan or Williamsburg, we may need to pay for parking or factor in the cost of alternate-side compliance. In Scarsdale or Garden City, parking is never an issue. These are small costs individually, but they add up over multi-day projects.
Materials: Bluestone vs Pavers vs Concrete, Native vs Exotic Plants
Material selection is the area where you have the most control over your project cost. For hardscape projects, the difference between materials is substantial. Natural bluestone (the gold standard for NYC patios) runs $25 to $40 per square foot installed, while concrete pavers come in at $15 to $30 per square foot, and poured concrete with a decorative finish is $10 to $20 per square foot. For a 400 square foot patio, that is the difference between $4,000 and $16,000 in materials alone.
For planting projects, native plants adapted to NYC’s Zone 7a/7b climate (like black-eyed susans, switchgrass, inkberry holly, and red maple) are generally less expensive and require less maintenance than exotic or specimen plants. A native perennial garden bed costs roughly $12 to $20 per square foot installed, while a bed featuring Japanese maples, ornamental specimen trees, and imported cultivars can run $30 to $60+ per square foot.
We always present material options at multiple price points so you can make informed decisions. Our design team will show you what different materials look like in your specific space and help you find the best balance of aesthetics, durability, and budget. Visit our Landscaping 101 guide for more on choosing the right materials.
Season: Spring Rush vs Winter Discounts
Landscaping in NYC follows a predictable seasonal pricing curve. The peak season runs from mid-April through late June, when everyone wants their yard done for summer. During this window, demand outstrips supply and lead times stretch to 3 to 4 weeks. Prices are at their highest because our crews are fully booked and material suppliers are charging peak-season rates.
The smartest move? Book your project during the off-season. January through March is the best time to sign a design-build contract — you will get our full attention during the design phase, and we can schedule your installation for early spring before the rush hits. Fall (September through November) is another excellent window, especially for tree and shrub planting, which actually performs better in fall than spring. See our seasonal pricing calendar below for a month-by-month breakdown.
Complexity: Flat Yard vs Sloped, Rooftop vs Ground Level
A flat, rectangular backyard is the simplest and most cost-effective type of project. Add slopes, and you need retaining walls ($50 to $150 per square foot of wall face) and potentially engineered drainage solutions. Multi-level terracing on a steep hillside property — common in Riverdale and parts of Westchester — can double or triple the cost compared to flat terrain.
Rooftop gardens represent the highest complexity tier. Every pound of soil, every planter, every plant must be lifted to the roof. Structural engineers must certify load capacity. Waterproofing must be protected or installed. Wind exposure at elevation requires different plant selection and anchoring systems. Irrigation requires dedicated water supply lines. The complexity premium for rooftop work is typically 2x to 3x compared to an equivalent ground-level project.
Permits and Regulations
New York City has more regulatory requirements for outdoor construction than almost any other city in America. Retaining walls over 4 feet require DOB permits and engineered drawings. Rooftop installations require DOB approval and often co-op or condo board sign-off. Fences over 6 feet need permits. Any work near a city street tree requires NYC Parks Department approval.
Permit costs range from a few hundred dollars for simple applications to $2,000+ for complex DOB filings that require professional engineering stamps. We handle all permit coordination as part of our design-build service — it is built into the project cost, not a surprise add-on. Learn more about NYC landscaping regulations on our FAQ page.
Drainage and Soil Conditions
NYC soil is notoriously variable. Some areas of Queens and Long Island have sandy, well-draining soil that is easy to work with. Much of Brooklyn and the Bronx sits on heavy clay that drains poorly and is difficult to dig. And some Manhattan properties have virtually no natural soil at all — just rubble fill from centuries of construction.
Poor drainage adds cost in two ways: first, you may need drainage solutions (French drains, dry wells, regrading) before any planting can happen. Second, heavy clay soil takes longer to excavate, which means more labor hours. If your property has standing water after rain, expect to add $1,500 to $10,000 for drainage work depending on the severity. We assess drainage during every initial consultation so there are no surprises.
Residential vs Commercial Landscaping Pricing
How Residential Pricing Works
Residential landscaping is priced per project or per visit. For maintenance services, you pay per visit ($150 to $500 depending on property size) or on a monthly contract that averages your annual cost into equal monthly payments. Monthly contracts typically save 10 to 15 percent compared to per-visit pricing because they guarantee us consistent work and allow us to plan crew schedules efficiently.
For design-build projects, residential pricing is based on a detailed scope of work with a fixed price. We quote the total project cost upfront — materials, labor, equipment, permits, everything. No hourly billing, no surprise change orders. If something unexpected comes up during the project (we hit a buried oil tank, the soil is contaminated, the existing irrigation is not where the plans show it), we discuss it with you before any additional cost is incurred.
How Commercial Pricing Works
Commercial landscaping is structured differently. Most commercial clients sign annual service contracts that cover grounds maintenance, seasonal color rotations, snow removal, and irrigation management under a single monthly fee. This gives property managers predictable budgeting with no seasonal spikes.
For property management companies and HOAs that manage multiple sites, we offer portfolio pricing. Instead of pricing each property individually, we quote the entire portfolio at a blended rate — which typically saves 15 to 25 percent compared to individual property pricing. The more properties in the portfolio, the better the rate. We assign a dedicated account manager to every commercial client who handles scheduling, quality inspections, and monthly reporting.
Commercial seasonal contracts typically run on a calendar year or fiscal year basis. A typical full-service commercial contract includes 30 to 35 maintenance visits (April through November), 3 seasonal flower rotations, spring and fall cleanups, irrigation management (startup, monitoring, winterization), and unlimited snow removal from November through April. Annual contract values range from $15,000 for a small retail property to $150,000+ for large multi-building complexes.
Interested in commercial service? Request a proposal or call us at (212) 202-8770. We will schedule a property walk-through within 48 hours.
Rooftop Garden Pricing: A Deep Dive
Rooftop gardens are the most complex and costly type of landscaping project in NYC — and also the most transformative. Here is exactly where your money goes.
Structural Assessment: $1,500 – $5,000
Before a single plant goes on a roof, a structural engineer must certify that the building can support the weight. Soil alone weighs 100 to 120 pounds per cubic foot when wet. A 12-inch deep planting bed across 500 square feet adds over 50,000 pounds to the roof. The structural assessment determines load capacity, identifies reinforcement needs, and produces the documentation required for DOB permit applications. This is non-negotiable — it protects both the building and our license.
Waterproofing and Root Barriers: $3,000 – $15,000
The existing roof membrane must be protected from root penetration and the additional weight and moisture of a garden. In many cases, we install a secondary waterproof membrane, root barrier layer, and drainage mat system on top of the existing roof. If the existing membrane is old or compromised, it may need to be replaced before garden construction begins — that is a roofing contractor cost, not a landscaping cost, but we coordinate it as part of the project. Waterproofing failure on a rooftop garden is catastrophic (think: water pouring into the penthouse below), so we do not cut corners here.
Lightweight Soil and Container Systems: $5,000 – $25,000
Standard garden soil is too heavy for rooftops. We use engineered lightweight growing media that weighs 40 to 60 percent less than traditional soil while providing proper drainage and nutrition. Custom planters — typically fiberglass, aluminum, or composite — are designed to distribute weight evenly across the roof structure. Planter costs alone can run $500 to $5,000 per unit depending on size and material. For a typical 800 square foot rooftop garden, expect $8,000 to $15,000 in containers and growing media.
Access and Logistics: $2,000 – $20,000
This is the cost that surprises people most. Getting materials to a rooftop in Manhattan often requires crane rental ($2,000 to $5,000 per day), street closure permits ($500 to $2,000), DOB permits for the crane ($1,000+), and coordination with the building’s management company. If a freight elevator is available, we can avoid crane costs — but elevator access must be scheduled, often during off-hours, and building staff may need to be present (at your cost). Some buildings charge a move-in/move-out fee for large material deliveries. For buildings without freight elevators or crane access, manual carry-up is the only option — dramatically increasing labor hours.
Plants, Irrigation, and Finishing: $5,000 – $30,000+
Wind-resistant plants for high elevations, automated drip irrigation with dedicated water supply, landscape lighting, custom seating, pergolas, and decorative elements complete the garden. Plant selection for rooftops is specialized — we choose species that tolerate wind, sun exposure, and the temperature extremes of an elevated, exposed environment. Rooftop irrigation systems must account for wind-driven evaporation, which can double water needs compared to ground level.
Total rooftop garden projects typically range from $15,000 for a small terrace with container plantings to $100,000+ for a full rooftop transformation with built-in structures. Request a rooftop consultation to get a detailed estimate for your building.
Maintenance Plan Pricing
Consistent, professional lawn and garden maintenance is the foundation of a great-looking property. Here is exactly what our maintenance plans include and what they cost.
Weekly Service
$150 – $500/visit
Best for properties with active-use lawns, high-visibility commercial sites, and clients who want their property looking immaculate at all times. Weekly visits during the growing season (April through November) ensure grass never gets ahead of us, beds stay weed-free, and hedges maintain clean lines.
Included: Mowing, edging, blowing, weeding, bed maintenance, shrub trimming (monthly), debris removal. Add-ons: Fertilization program ($400–$800/season), aeration and overseeding ($300–$600), seasonal flower rotations ($300–$2,000/rotation).
Biweekly Service
$150 – $500/visit
A cost-effective option for smaller properties, low-traffic areas, or budget-conscious homeowners. Every-other-week visits keep your property looking good without the premium of weekly service. We recommend biweekly for properties under 2,000 square feet of landscape area or those with drought-tolerant, low-growth plantings.
Included: Same services as weekly. Biweekly clients get 18 to 20 visits per season vs 30 to 35 for weekly. Annual savings: Roughly 40 percent less than weekly service on a per-season basis.
Seasonal Add-On Services
Spring Cleanup
$500 – $2,000. Remove winter debris, cut back perennials, edge all beds, first mow, apply pre-emergent. Gets your property ready for the growing season.
Fall Cleanup
$500 – $2,500. Leaf removal (multiple rounds), bed cutback, final mow, irrigation winterization, winter mulch application.
Snow Removal
$2,000 – $15,000/season. Maintenance clients get priority snow removal scheduling and 10% off seasonal contracts.
How to Read a Landscaping Estimate
Whether you are comparing quotes from multiple companies or reviewing our estimate, here is what to look for — and what red flags to watch out for.
What Every Line Item Should Tell You
A professional landscaping estimate breaks the project into clear line items. Each line should include: what is being done (scope), what materials are being used (with specifics — not just “pavers” but “Belgard Bergerac pavers in Victorian”), the quantity (square feet, linear feet, number of plants), and the cost. Our estimates include unit prices so you can see exactly what you are paying per square foot, per plant, or per fixture.
Common line item categories include: site preparation and demolition, materials (broken down by type), labor, equipment rental, permit fees, delivery charges, and project management. If an estimate lumps everything into one number with no breakdown, that is a red flag. You should always be able to see where your money is going.
Red Flags in Landscaping Estimates
- ×No written estimate at all — just a verbal number
- ×A single lump-sum price with no line item breakdown
- ×Vague material descriptions (“pavers” instead of specific product and color)
- ×No mention of permits when the project clearly requires them
- ×Price that is 40%+ below other quotes (they are cutting corners somewhere)
- ×Demand for full payment upfront before any work begins
- ×No proof of insurance or willingness to provide a certificate
- ×No timeline or project schedule included
Questions to Ask Before Signing
- ?What happens if the project goes over budget? (Our answer: we eat it — our fixed-price estimates are fixed.)
- ?Are you licensed and insured? Can I see a certificate of insurance?
- ?Who will actually be on my property doing the work? (Subcontractors vs in-house crews)
- ?What is your payment schedule?
- ?What warranty or guarantee do you offer on materials and workmanship?
- ?Do you handle permits, or is that my responsibility?
Have more questions? Visit our FAQ page or get in touch directly.
Seasonal Pricing Calendar
When you book matters almost as much as what you book. This calendar shows demand levels, relative pricing, and the best time to schedule each type of service throughout the year.
| Month | Demand | Pricing |
|---|---|---|
| January | Low | Lowest |
| February | Low | Low |
| March | Rising | Moderate |
| April | High | High |
| May | Peak | Highest |
| June | Peak | Highest |
| July | High | High |
| August | Moderate | Moderate |
| September | High | High |
| October | Moderate | Moderate |
| November | Low | Low |
| December | Lowest | Lowest |
Book during low-demand months (November through February) for the best pricing and fastest scheduling. Contact us to lock in off-season rates.
10 Ways to Save Money on NYC Landscaping
Smart planning saves real money. These are specific, actionable tips based on our experience doing thousands of projects across the NYC metro area.
Book During the Off-Season
Sign your design-build contract in January or February and schedule installation for early spring. You will get our best pricing, priority scheduling, and more design revision rounds because we have bandwidth. Projects booked in May or June often pay 10 to 20 percent more due to peak demand.
Choose Native Plants Over Exotics
Native plants like black-eyed susan, switchgrass, inkberry holly, and Eastern red cedar cost less upfront, require less water and fertilizer, and survive NYC winters without babying. Over 5 years, a native plant garden costs roughly 40 percent less to maintain than an exotic garden. Our design team specializes in beautiful native plant designs — visit our landscape design page to learn more.
Sign an Annual Maintenance Contract
Annual contracts save 10 to 15 percent compared to per-visit pricing. You also get priority scheduling, locked-in rates, and consistent service from a crew that knows your property. Month-to-month clients pay more per visit and get scheduled after contract clients during busy periods.
Phase Your Project Over Multiple Seasons
You do not have to do everything at once. A phased approach lets you spread the cost over 2 to 3 years. Year one: hardscape and structural elements. Year two: planting and irrigation. Year three: lighting and finishing touches. Our designers create phased plans at no extra charge.
Invest in Irrigation to Reduce Long-Term Costs
A properly designed irrigation system pays for itself within 2 to 3 seasons by reducing plant replacement, eliminating hand-watering labor, and using water more efficiently. Smart controllers with rain sensors cut water usage by 30 to 50 percent compared to manual watering.
Bundle Services for Volume Discounts
Clients who combine maintenance, snow removal, and seasonal color under one contract receive bundled pricing that saves 15 to 20 percent compared to hiring different vendors for each service. One vendor, one relationship, one invoice.
Consider Concrete Pavers Instead of Bluestone
Modern concrete pavers from manufacturers like Belgard and Unilock are beautiful, durable, and cost 30 to 50 percent less than natural bluestone. They come in dozens of colors and patterns, require no sealing, and individual pavers can be replaced if damaged. For patios over 300 square feet, the savings are significant.
Improve Drainage First
Skipping drainage work to save money upfront is the most expensive mistake we see. Poor drainage kills plants, cracks hardscape, and creates standing water that breeds mosquitoes and undermines foundations. Spending $2,000 to $5,000 on proper drainage can save you $10,000+ in plant replacements and hardscape repairs over the next decade.
Right-Size Your Lawn
Do you actually use all that turf? Replacing underused lawn areas with mulched beds, ground cover, or gravel paths reduces mowing costs and water usage. A 3,000 square foot lawn reduced to 1,500 square feet cuts your maintenance cost nearly in half while creating space for lower-maintenance planting beds.
Get Multiple Quotes — But Compare Apples to Apples
We encourage you to get 2 to 3 quotes for any project over $5,000. But compare them carefully. The cheapest quote often omits permit costs, uses lower-grade materials, or plans to use subcontractors instead of in-house crews. Make sure every quote specifies the same materials, scope, and timeline before comparing the bottom line.
Want personalized cost-saving advice for your property? Request a free estimate and we will identify the smartest way to maximize your budget. Also check out our Landscaping 101 guide for more homeowner tips.
What’s Always Included
Every project — from a $150 maintenance visit to a $100,000 rooftop garden — includes these as standard. No add-on fees, no upsells.
Want to know more about how we work? Visit our About page or read our FAQ.
Pricing FAQ
Common questions about what landscaping costs in NYC. For more, visit our full FAQ page.
How much does landscaping cost in NYC?
NYC landscaping ranges from $150 per visit for basic lawn maintenance to $100,000+ for a full rooftop garden installation. Most residential design-build projects fall between $5,000 and $25,000. The biggest factors are property size, access, materials, and borough. Use the service-by-service pricing table above for detailed ranges on every service we offer.
Do you charge for estimates?
Never. Every estimate is free with no obligation. We visit your property, discuss your vision, and deliver a detailed written quote within 48 hours. Request your free estimate here.
How do you structure payments?
For maintenance: monthly billing or per-visit invoicing. For design-build projects: typically 30% deposit to start, 40% at midpoint, 30% on completion. For projects over $25,000, we offer customized payment schedules. We accept checks, credit cards, and ACH transfers.
Why is Manhattan landscaping more expensive than other boroughs?
It is not the landscaping that costs more — it is the logistics. Getting materials to a Manhattan rooftop requires crane rentals ($2,000–$5,000/day), freight elevator scheduling, DOB permits ($1,000+), and sometimes street closure permits ($500–$2,000). Labor takes longer because everything is hand-carried through lobbies and elevators instead of unloaded from a truck. The work quality is identical — the access costs are what add 30 to 50 percent.
Do you offer seasonal contracts?
Yes. Our maintenance clients get priority scheduling, locked-in pricing, and year-round service including snow removal. Seasonal contracts save 10 to 15 percent versus per-visit pricing and guarantee your property is covered from spring cleanup through winter snow management. Contact us to build a custom annual plan.
Can I start small and add services later?
Absolutely. Many clients start with maintenance and add design-build projects over time. We create phased plans that fit your budget and timeline. Starting with maintenance also lets us learn your property before designing — we identify drainage issues, sun and shade patterns, and soil conditions that inform better design decisions.
Do you match competitors' prices?
We compete on quality, reliability, and results — not price. That said, our pricing is competitive for the level of service, materials, and expertise we provide. If you have a lower quote from another company, we are happy to review it and explain the differences in scope, materials, and approach. Often the “cheaper” quote is cheaper for a reason.
What areas do you serve?
We serve all five NYC boroughs (Manhattan, Brooklyn, Queens, Bronx, Staten Island) plus Long Island and Westchester County. That covers over 130 neighborhoods. Check our areas pages for neighborhood-specific information.
How far in advance should I book?
During peak season (April through June), book 3 to 4 weeks ahead. During off-season (November through February), we can often start within 1 to 2 weeks. For large design-build projects, start the design process 2 to 3 months before your desired installation date. See our seasonal pricing calendar above for month-by-month guidance.
What happens if weather delays my project?
Weather delays happen — this is New York. We build weather contingency into every project schedule. If rain or snow delays your installation, we reschedule at the next available window at no additional cost. Your contract price is fixed regardless of weather delays. We communicate proactively about any schedule changes.
Do you handle NYC permits?
Yes. We handle all NYC Department of Buildings (DOB), Department of Transportation (DOT), and Parks Department permits as part of our design-build service. Permit costs are included in your estimate — never a surprise add-on. For rooftop projects, we also coordinate with co-op and condo boards and their management companies.
Do you offer financing?
For projects over $10,000, we offer phased payment plans and can structure milestones to spread payments over the project duration. We do not currently offer third-party financing, but our phased installation approach lets you break a large project into smaller, separately funded phases over multiple seasons.
What is your cancellation policy?
For maintenance: cancel anytime with 30 days notice. For design-build: deposits are refundable up until design approval. After design approval and material ordering, a cancellation fee may apply to cover materials already purchased and time invested. Full details are in every contract.
Are you licensed and insured?
Yes. We carry full general liability insurance, workers compensation, and all required NYC business licenses. We provide certificates of insurance to every client and their building management company upon request. Learn more on our About page.
Get Your Free Estimate Today
No pressure, no obligation, no hidden fees. Tell us about your property and we will provide a detailed written estimate within 48 hours. Serving all five boroughs, Long Island, and Westchester.
green@landscapinginnyc.com · (212) 202-8770 · 150 W 47th St, New York, NY 10036